| | |  | Grips | Home » » » Universal Rubber Grip Sleeve Handall Universal Grip Sleeve | | | | | | | Description: | | Known to properly fit the following guns: Glock 17, 18, 19, 20, 21, 22, 23, 24, 26, 27; S&W Models 39, 41, 59, 422, 622, 645, 669, 745, 909, 2206, 3906, 6906, and 3rd gen series 1000, 4000, 4500, 5900, 6900, with or without frame mounted decockers - Sigma 9mm, & 40; Sig Sauer Models P220, 225, 226, 228, 229, 230, 232, and 239; Ruger Models P85, 89, 90, 91, 93, 94, 95, 92DAO, and 22/45; Colt Double Eagle; Beretta 84, 85, 92, 92C, and Cougar; Browning Buckmark, Challenger II, BDA, Hi-power and clones; Taurus 92, 92C, 99, 100, 101; EAA Witness 83 and 85; Springfield P9, Tanfoglio, CZ75, and clones; Astra A-100, Constable II; Interarms Firestar; Walther P-38, P-88; Llama Omni; Steyr GB; KBI BK and Compact GKK-92c; Bernadelli PO18S; Daewoo DP51; H&K USP and USP Compact, and 70-Z; Intratec TECDC9, TEC22; Automag II; Zastava 99; High Standard Victor; Jericho 9mm; etc. Hogue HANDALL grip sleeves are scientifically designed with a special contoured shape that hugs the contours of your gun. This exclusive shape gives a secure fit with no loose spots, giving HANDALL the tightest and most secure fit to your gun possible. The special shape is far superior to any simple "tube" sleeve. Hogue HANDALL features include: proportioned finger grooves, a unique cobblestone texture and ambidextrous PALM SWELLS for the ultimate in a comfortable, non-slip surface. Molded from a modern soft but durable rubber, HANDALL grip sleeves are easy to install with no lubrication required. These comfortable grips are tough and impervious to all oils and solvents found around firearms, giving years of dependable service. | | | Features: | |
• Handall
• 743108170007
• Hogue promises to do their utmost to provide you with the finest handgun stock made and guarantee t
| | | Product Details: | | | Product Weight:
| 0.1 pounds | | Package Length:
| 7.9 inches | | Package Width:
| 4.5 inches | | Package Height:
| 1.8 inches | | Package Weight:
| 0.15 pounds | | Average Customer Rating:
|  based on 129 reviews |
| | | | Customer Reviews: | |
Average Customer Review:
 ( 129 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
16 of 16 found the following review helpful:
 Hogue Handall, a must-have on hand!Oct 14, 2009
By Vincent Wood
Myself being a new owner of a Ruger P95, even though I love my pistol, found the factory grip a little lacking. A good friend of mine has a Ruger P94 equipped with this grip, and recommended that I purchase one of the Hogue slip-on grips to improve the traction of my pistol. Well, to say that I am impressed, would be an understatement. From the moment I "slipped" the grip on my pistol ( I found a little patience and a sturdy, non-sharp object, like a spoon handle was the remedy to apply this grip.) and trimmed up the little bit of overhang with a sharp pair of scissors, noticed the difference immediately. The palm swells and finger grooves add so much more grip and comfort, it was almost hard to believe that I was holding the same pistol!! I don't know how some people keep polymer frame pistols stock, without adding something as cheap, simple and ever so effective as the Hogue Handall grip to their fire arm! This makes all the difference in my confidence with drawing the weapon from it's holster, practicing self-defense drills and even shooting! Like I said before, this is a must-have if you're looking for a cheap, simple amazing solution to factory grips on your pistol! A++ to Hogue!
25 of 30 found the following review helpful:
 Your shirt will ride up on thisOct 09, 2009
By Adam
I bought these for two of my glocks - a full size 31, and a subcompact 26. The 26 is sometimes used for legal concealed carry. Installing them wasn't too difficult - I heated them up in boiling water, then slide over the grips. The G26 grip required some trimming with a razor blade, but this was expected (in fact I think it even says as much on the box) and was simple enough to do.
The grip is pretty comfortable - not a huge improvement, but it does add a bit of cushion to the otherwise hard plastic glock grip. However, this slight improvement in comfort comes with two unacceptable costs:
1) An increase in grip thickness - these babies are pretty fat for just a grip cover.
2) If you use this for IWB carry, your shirt WILL ride up on the tacky grip material. I tried it with several different shirts (different materials), all with the same result - put the gun in a quality IWB holster, and after only a few minutes of walking around the shirt slowly creeps up to reveal your gun to the entire gun-fearing world. Luckily I tried these at home before going out into public. I've talked to a number of others who have tried these grips, and they all had the same problems, so this isn't just me.
I ended up taking them off both of my glocks (even the 31, which I don't carry concealed, simply because it just wasn't that comfortable to justify the increase in grip thickness).
There are better options out there - either suck it up and get used to the stock grip, or use thinner and better options such as the various grip tapes available.
5 of 5 found the following review helpful:
great grip.. you cant beat the price...Sep 23, 2010
By egarciaz79
this is a great grip, i got it for my ruger p95 and the fit is incredible. i took long to be delivered because of the 3-4 day processing but it was worth the waiting.
4 of 4 found the following review helpful:
Feels great!Sep 21, 2011
By 2KCJ
It took me a while to get this sleeve slid onto the grip of my Hi-Point .45, but once it was on there, it fit like a glove and felt very good. In my case, it required no trimming at all. If you're familiar with the Hi-Point, it doesn't exactly have the best grips on it. With the sleeve, it made the gun feel much more comfortable and secure. I have no doubt that this will greatly improve the grip on the gun when hands are wet or sweaty.
4 of 4 found the following review helpful:
Works Great for Kel-Tec Sub 2000Mar 09, 2011
By spsheezy
Just installed the Hogue Handall Universal on my Kel-Tec Sub 2000/Glock 17 grip. Some people may require trimming on the very bottom of the grip because there is a very small gap between the back of the bottom of the grip and the Hogue sleeve. But it is so small that I don't find it to be a problem in the least bit. Recommended for Kel-Tec Sub 2000!
See all 129 customer reviews on Amazon.com
| | |
|
